Drone Flight Controller Repair

    Gyro Drift, IMU Faults, Dead Boards & Chip-Level Rework — Fixed On-Site

    (469) 457-0134

    Flight Controller Repair in Dallas & Irving, TX

    The flight controller is the brain of the aircraft, and most 'dead drone' complaints trace back to it. We diagnose the board itself — not just swap parts — so a crashed or water-damaged controller can often be saved instead of replaced.

    What This Service Covers

    Board-level diagnosis

    Power rails, clock signals and sensor lines tested on the bench.

    IMU / gyro repair

    Drift, 'sensor error' and calibration faults traced to the failing chip.

    Chip & component replacement

    Microcontrollers, regulators and connectors reworked under the microscope.

    Water & crash damage

    Corrosion cleaning and trace repair after a wet landing or hard impact.

    Firmware restore

    Bricked or corrupted firmware reflashed and re-bound to the aircraft.

    Bench flight-test

    Throttle, orientation and sensor logs verified before the drone leaves us.

    Signs You Need Flight Controller Repair

    • Drone won't arm or powers on with no response
    • Persistent 'IMU calibration failed' or sensor warnings
    • Drone drifts, wobbles or flips on takeoff
    • Controller got wet, smoked, or died after a crash

    How the Repair Works

    1

    Intake & inspection

    We log the symptoms and open the aircraft on the bench.

    2

    Board testing

    Rails, sensors and connectors measured point-by-point.

    3

    Repair or replace

    Component-level fix where possible, module swap where not.

    4

    Calibrate & test

    Sensors calibrated, motors spun, logs reviewed before handoff.

    Ready to Get Your Drone Flying Again?

    Book online in under two minutes, or call and tell us what the aircraft is doing. We come to you across Dallas, Irving, Lancaster and the surrounding cities.